Cisco ASA CLI · Techclick Simulator

About this lab

IOS-like multi-mode CLI. Start in user mode >. Type enable for privileged #, then configure terminal for config (config)#. Sub-config modes appear for interface, object network, object service.

User / privileged mode

enableEnter privileged exec (password: cisco)
show versionHardware + software
show interface ip briefOne-line interface summary
show routeRouting table
show running-configFull running config
show connActive connections
show xlateNAT translations
show access-listACL hit-counts
packet-tracer input inside tcp 10.10.10.21 5000 8.8.8.8 53Trace a packet
ping 8.8.8.8Ping
write memorySave config

Config mode

configure terminalEnter global config
hostname FW1Rename device
interface gi0/3Enter interface sub-config
nameif labSet logical name
security-level 50Set security level
ip address 10.30.30.1 255.255.255.0Assign IP
no shutdownBring up
object network LAB-NETDefine network object
subnet 10.30.30.0 255.255.255.0Object subnet
access-list lab_acl extended permit tcp any object LAB-NET eq wwwACL line
access-group lab_acl in interface labApply ACL
route outside 10.99.0.0 255.255.0.0 203.0.113.1Static route
endBack to privileged